Lexmark XM9100 Series, Руководство пользователя

Страница: 31 / 364

4
Push the memory card straight into the connector, and then push the card toward the controller board wall until
it
clicks into place.
Installing an optional card
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch a metal surface on the printer before touching any controller board electronic components or connectors.
1
Access the controller board.
For more information, see “Accessing the controller board” on page 27 .
2
Unpack the optional card.
Warning—Potential Damage: Avoid touching the connection points along the edge of the card. Doing so may
cause damage.
3
Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the controller board.
Additional printer setup 31