Lexmark Optra M410, Руководство пользователя

Страница: 86 / 312

74
Chapter 3: Using the Operator Panel and Menus
Download Target RAM*
Flash
Disk
The
Download Target
menu item specifies the storage location for downloaded resources,
such as fonts and macros.
Storing downloaded resources in flash memory or hard disk is permanent storage rather than
the temporary storage that RAM provides. You can add resources to flash memory or to the
hard disk until the option is full. Use your software application or the printer Toolkit to
download resources to the printer.
The
Download Target
menu item only displays if a formatted flash memory option or hard disk
option is installed in the printer and is not defective or Read/Write or Write protected.
51 Defective Flash
or
61 Defective Disk
may display when the printer is turned on, or during
format and write operations. See
51 Defective Flash
on page 161 or
61 Defective Disk
on
page 165 for more information.
Disk
does not display for
Download Target
if
Job Buffer Size
is set to
100%
. See
Job Buffer
Size
on page 77 for more information.
If neither option is installed,
Download Target
does not display and all downloaded resources
are automatically stored in printer memory (RAM).
Print Timeout Disabled
1…255 (90*)
The
Print Timeout
setting determines the time (in seconds) the printer waits before printing
the last page of a print job that does not end with a command to print the page. The print
timeout counter does not start until the
Waiting
message displays.
When a print timeout occurs, the printer stores the page in the print buffer.
Select
Disabled
to turn
Print Timeout
off. When
Print Timeout
is disabled, the printer does not
print the last page of a print job until one of the following occurs:
• The printer receives enough information to fill the page.
• The printer receives a Form Feed command.
• You select
Print Buffer
from the
JOB MENU
. See page 70 for more information.
Wait Timeout Disabled
15…65535 (40*)
The
Wait Timeout
setting determines the amount of time (in seconds) the printer waits to
receive additional bytes of data from the computer. When this timeout expires, the print job is
canceled.
Select
Disabled
to turn
Wait Timeout
off.
Wait Timeout
is only available when using PostScript 3 emulation. The setting has no effect
on PCL emulation print jobs.
Setup Menu (continued)
Menu Item Values
*Factory default