291
Job Acct Limit
Purpose:
To specify the number of print jobs for which statistics are maintained on your printer hard disk.
Values:
If you set Job Acct Limit to 10, the statistics from the 10 most recent print jobs are stored on the hard
disk. When the limit is reached, statistics for the oldest print job are discarded and replaced with the
statistics from the current print job. If you change the Job Accounting Limit, all job statistics currently
stored on the hard disk are deleted.
Note: Job Acct Limit is only displayed when a hard disk is installed, is neither defective
nor Read/Write or Write protected, Job Buffer Size is not set to 100%, and Job
Accounting is set to On.
See also:
Job Accounting
,
Job Acct Stat
Page Protect
Purpose:
To successfully print a page that may otherwise generate
Complex Page
errors.
Values:
If, after selecting On, you still cannot print the page, you may also have to reduce the size and number
of fonts on the page, or increase the installed printer memory.
For most print jobs, you do not need to select On. When On is selected, printing may be slower.
Disabled
Stores statistics for each print job until the hard disk is full.
10...1000 (1000*)
Stores statistics for the specified number of print jobs.
Off*
Prints a partial page of data if memory is insufficient to process the entire page.
On
Ensures that an entire page is processed before it prints.
Содержание 12N0003 - C 910 Color Laser Printer
