Lenovo ThinkSystem SR530, Руководство по обслуживанию

Страница: 148 / 184

xcc_external_ip
The BMC/IMM/XCC IP address. There is no default value. This parameter is required.
xcc_user_id
The BMC/IMM/XCC account (1 of 12 accounts). The default value is USERID.
xcc_password
The BMC/IMM/XCC account password (1 of 12 accounts).
Note:
BMC, IMM, or XCC internal LAN/USB IP address, account name, and password are all
valid for this command.
Example commands are as follows:
onecli config set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model>
−−bmc
xcc_user_id:xcc_password@xcc_external_ip
onecli config set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n>
−−bmc
xcc_user_id:xcc_password@xcc_external_ip
4. Reset the Lenovo XClarity Controller to the factory defaults. Go to
https://sysmgt.lenovofiles.com/help/
topic/com.lenovo.systems.management.xcc.doc/NN1ia_c_resettingthexcc.html
for more information.
Enable TPM/TCM
The server supports Trusted Platform Module (TPM), Version 1.2 or Version 2.0.
Note:
For customers in Chinese Mainland, integrated TPM is not supported. However, customers in Chinese
Mainland can install a Trusted Cryptographic Module (TCM) adapter or a TPM adapter (sometimes called a
daughter card).
When a system board is replaced, you must make sure that the TPM/TCM policy is set correctly.
CAUTION:
Take special care when setting the TPM/TCM policy. If it is not set correctly, the system board can
become unusable.
Set the TPM/TCM policy
By default, a replacement system board is shipped with the TPM/TCM policy set to
undefined
. You must
modify this setting to match the setting that was in place for the system board that is being replaced.
There are two methods available to set the TPM policy:
• From Lenovo XClarity Provisioning Manager
To set the TPM policy from Lenovo XClarity Provisioning Manager:
1. Start the server and press F1 to display the Lenovo XClarity Provisioning Manager interface.
2. If the power-on Administrator password is required, enter the password.
3. From the System Summary page, click
Update VPD
.
4. Set the policy to one of the following settings.
–
TCM enabled - Chinese Mainland only
. Customers in Chinese Mainland should choose this
setting if a TCM adapter is installed.
–
TPM 2.0 enabled - Chinese Mainland only
. Customers in Chinese Mainland should choose this
setting if a TPM 2.0 adapter is installed.
–
TPM enabled - ROW
. Customers outside of Chinese Mainland should choose this setting.
–
Permanently disabled
. Customers in Chinese Mainland should use this setting if no TPM or TCM
adapter is installed.
140
ThinkSystem SR530 Maintenance Manual