Lenovo ThinkServer TS460, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 93 / 172

Figure 48. Installing the drive
4. Check the drive status LEDs to ensure that the drive is operating properly. You might have to restart the
server for the newly installed drive to be recognized. See “Hot-swap drive activity and status LEDs” on
page 24. If the drive is faulty, reinstall it until it is operating properly.
5. Close and lock the front door.
Hot-swap power supply
The hot-swap power supplies help you avoid significant interruption to the operation of the system when a
power supply fails. You can install or replace a power supply without turning off the server.
• “Removing a hot-swap power supply” on page 80
• “Installing a hot-swap power supply” on page 80
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with
one of these parts, contact a service technician.
Chapter 5
.
Replacing hardware
79