Lenovo ThinkServer TS460, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 88 / 172

Before you begin, review the following SSD installation rules:
• Follow the order of the HDD bays when installing an SSD. See “Front view of the server” on page 14
to locate the HDD bays in your server.
• For RAID configuration, the SSDs must be the same type with the same capacity if they are within a single
RAID array. For more information, see “Configuring RAID” on page 47.
• For SSDs with different capacities, install the SSD by following the order of the HDD bays as well as the
order from the lowest capacity to the highest capacity.
Removing a 2.5-inch SSD from a 3.5-inch HDD bay
To remove a 2.5-inch SSD, do the following:
1. Use the front door key to unlock the front door (available on some models), and then open the front door.
2. Locate the appropriate HDD bay. See “Front view of the server” on page 14.
3. Remove the 3.5-inch drive bracket with the SSD. See “Removing a hot-swap drive” on page 77.
4. Remove the five screws that secure the SSD and the drive adapter. Then, remove the SSD and the
drive adapter from the bracket.
Figure 40. Removing the screws that secure the SSD and the drive adapter
5. Remove the two screws that secure the SSD. Then, lift the SSD up to remove it from the drive adapter.
Figure 41. Removing the SSD from the drive adpater
74
ThinkServer TS460 User Guide and Hardware Maintenance Manual