Lenovo ThinkServer RS160, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 103 / 142

5. Touch the static-protective package that contains the new power supply assembly to any unpainted
surface on the outside of the server. Then, remove the new power supply assembly from the package.
6. Note the orientation of the new power supply assembly and then position it into the chassis. Ensure that
the five screw holes in the new power supply assembly are aligned with the corresponding holes in the
chassis. Then, install the five screws to secure the new power supply assembly.
Figure 72. Installing the screws to secure the new power supply assembly
7. Connect the power cables to the system board and other components. See “System board
components” on page 25 and “Connecting the cables” on page 19.
8. If you are instructed to return the old power supply assembly, follow all packaging instructions and use
any packaging materials that are supplied to you for shipping.
To complete the parts replacement, go to “Completing the parts replacement” on page 95.
For service technician only: replacing the microprocessor
CAUTION:
The heat sink and the microprocessor might be very hot. Turn off the server and wait three to five
minutes to let the server cool before removing the server cover.
Notes:
• Ensure that the new microprocessor is the correct type your server supports. See “Features and
specifications of your server” on page 7.
• Your microprocessor, socket, and socket cover might look slightly different from the illustrations in this
topic.
To replace the microprocessor, do the following:
1. Prepare your server. See “Preparing your server in advance” on page 47.
2. Remove the air baffle. See “Removing the air baffle” on page 50.
3. Remove the heat sink. See “Removing the heat sink” on page 52.
Chapter 5
.
Replacing hardware
89