Lenovo ThinkServer RS160, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 63 / 142

Rack handles
• “Removing the rack handles” on page 49
• “Installing the rack handles” on page 49
Removing the rack handles
To remove the rack handles, do the following:
1. If the server is installed in a rack, remove the server from the rack. See “Removing or extending the
server from the rack” on page 47.
2. On each side of the server, remove the two screws 1 that secure the rack handle and then remove the
rack handle from the chassis.
Figure 20. Removing the rack handles
Installing the rack handles
To install the rack handles, do the following:
Chapter 5
.
Replacing hardware
49