Lenovo ThinkServer RD340, Руководство по установке операционной системы

Страница: 16 / 70

6. In the “Where do you want to install Windows?” window, connect the USB storage device that contains
the driver to your server and click Load Driver .
7. Go to the folder where the driver is stored and click OK .
8. Select the driver that you want to install and click Next to install the driver.
9. In the “Where do you want to install Windows?” window, click Drive options (advanced) .
10. Select the hard disk drive on which you want to install the operating system, and then click New .
11. Type the amount of space (in MB), and then click Apply .
12. In the Install Windows window, click OK .
13. Ensure that the drive partition is correct, and then click Next . The installation begins.
Notes:
• Your server will restart several times during the installation.
• The drive partition must be greater than 80 GB. It is recommended that the drive partition is greater
than 120 GB.
14. In the Continue Installation window, select Clean Install . Then, click Next .
15. Click Open Date and Time to verify the clock and time zone settings to set your date and time.
Then, click Next .
Note: If the server can identify the Ethernet card, go to step 22 after step 15.
16. When the “Cannot find the local network” window is displayed, connect the USB storage device
that contains the driver for the Ethernet card to your server. Press Shift+F10, input the command
devmgmt.msc
, and press Enter.
17. In the Device Manager window, click other devices , and then right-click Ethernet Controller .
18. Click Update Driver Software ➙ Browse my computer for driver software .
19. Go to the folder where the driver is stored, and then click Next .
20. In the “Update Driver Software-Intel... Connection” window, click Close . Go back to the command
window and close it.
21. Go back to the “Cannot find the local network” window, and click Back to return to the “Verify the clock
and time zone settings” window. Then, click Next .
22. In the “Server network configuration” window, configure the network settings as you need. Then,
click Next .
23. In the Get important updates window, select the update method as you need.
Note: The following steps are based on the scenario that Do not get the most recent installation
updates is selected in this step.
24. In the Connecting your server window, configure the company information as you need. Click Next .
25. Personalize the server and network information as you need. Click Next .
26. In the “Add a network administrator account” window, set your user name and password. Then, click
Next .
Note: The password must contain at least eight characters and consist of upper case letters, lower
case letters, and numbers.
27. In the “That is all the information needed” window, click Next to restart the server. When the Expanding
and installing files window is displayed, the server starts installing files automatically. Your server will
restart several times.
28. When prompted, click Close the program to log in to the operating system.
10
ThinkServer RD340 and RD440 Operating System Installation Guide