Lenovo ThinkCentre M73 10B0 Скачать руководство пользователя страница 236

Страница: 236 / 256

4. Lift the small handle

and open the retainer

to access the microprocessor

Figure 203. Accessing the microprocessor

5. Lift the microprocessor straight up and out of the microprocessor socket.

Notes:

• Your microprocessor and socket might look different from the one illustrated.

• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.

• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be

kept as clean as possible.

Figure 204. Removing the microprocessor

6. Ensure that the small handle is in the raised position and the microprocessor retainer is fully open.

7. Remove the protective cover that protects the gold contacts of the new microprocessor.

230

ThinkCentre M73 Hardware Maintenance Manual

Содержание ThinkCentre M73 10B0

































































































































































































































































Результаты поиска

Содержание ThinkCentre M73 10B0

Отзывы:

Похожие инструкции для ThinkCentre M73 10B0

Бренды по названию

Популярные бренды

Lenovo ThinkCentre M73 10B0, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkCentre M73 10B0

Отзывы:

Похожие инструкции для ThinkCentre M73 10B0

Бренды по названию

Популярные бренды