Lenovo ThinkCentre M73 10B0, Руководство по техническому обслуживанию аппаратной части

Страница: 137 / 256

2. Connect a new keyboard to the appropriate connector on the computer. Your keyboard might be
connected to a PS/2 keyboard connector 1 or a USB connector 2 . Depending on where you want
to connect the new keyboard, see “Locating connectors, controls, and indicators on the front of your
computer” on page 69 or “Locating connectors on the rear of your computer” on page 70.
Figure 65. Keyboard connectors
Replacing the mouse
Attention: Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” on page 1.
This section provides instructions on how to replace the mouse.
To replace the mouse, do the following:
1. Disconnect the old mouse cable from the computer.
2. Connect a new mouse to the appropriate connector on the computer. Your mouse might be connected
to a PS/2 mouse connector 1 or a USB connector 2 . Depending on where you want to connect the
new mouse, see “Locating connectors, controls, and indicators on the front of your computer” on page
69 or “Locating connectors on the rear of your computer” on page 70.
Figure 66. Mouse connectors
Completing the parts replacement
After completing the installation or replacement for all parts, you need to reinstall the computer cover
and reconnect cables.
To reinstall the computer cover and reconnect cables to your computer, do the following:
Chapter 9
.
Replacing FRUs (machine types: 10B0, 10B1, 10B2, 10B3, 10HJ, and 10HK)
131