Lenovo RackSwitch G8332, Справочник по командам

Страница: 664 / 776

664
G8332 Command Reference for ENOS 8.4
The following table describes the available actions:
udp ‐ src UDP source port (0 ‐ 65535)
udp ‐ dst UDP destination port (0 ‐ 65535)
icmpv4 ‐ type ICMPv4 type
icmpv4 ‐ code ICMPv4 code
eth ‐ type ʺ arp ʺ / ʺ 0806 ʺ or ʺ ip ʺ / ʺ 0800 ʺ or (hex ‐ value < =65535)
ip ‐ proto ʺ tcp ʺ or ʺ udp ʺ or 0 ‐ 255
ip ‐ dscp IP DSCP (6 bits in ToS field)
arp ‐ op ʺ request ʺ or ʺ reply ʺ (can be set only if eth ‐ type is ARP)
mpls ‐ label MPLS label
all all qualifiers or any qualifier
Table 378.
Static Flow Actions in OpenFlow 1.0
Action Value
output ʺ all ʺ , ʺ in ‐ port ʺ , ʺ controller ʺ or a valid port
set ‐ src ‐ mac Change source MAC address
set ‐ dst ‐ mac Change destination MAC address
strip ‐ vlan ‐ id Remove VLAN identifier
set ‐ vlan ‐ priority Set 802.1p priority code point value (0 ‐ 7)
set ‐ nw ‐ tos Set IP Type of Service (0 ‐ 255)
drop Drop packet
max ‐ len Maximum length to send to controller
Table 379.
Static Flow Actions in OpenFlow 1.3
Action Value
output ʺ all ʺ , ʺ in ‐ port ʺ , ʺ controller ʺ or a valid port
output ‐ portchannel output on a valid portchannel (static LAG or static
LACP LAG)
set ‐ eth ‐ src change source MAC address
set ‐ eth ‐ dst change destination MAC address
push ‐ vlan push a new VLAN tag
pop ‐ vlan pop the outer VLAN tag
Table 377.
Static Flow Matching Qualifiers in OpenFlow 1.3
Qualifier Value