Lenovo RackSwitch G8332, Справочник по командам

Страница: 440 / 776

440
G8332 Command Reference for ENOS 8.4
VMAP Configuration
A VLAN Map is an Access Control List (ACL) that can be assigned to a VLAN or a
VM group instead of a port. In a virtualized environment where Virtual Machines
move between physical servers, VLAN Maps allow you to create traffic filtering
and metering policies associated with a VM’s VLAN.
For more information about VLAN Map configuration commands, see “Access
Control List Configuration” on page 417 .
For more information about assigning VLAN Maps to a VLAN, see “VLAN
Configuration” on page 493 .
For more information about assigning VLAN Maps to a VM group, see “VM
Group Configuration” on page 639 .
The following table lists the general VMAP configuration commands.
Table 215.
VMAP Configuration Options
Command Syntax and Usage
access ­ control vmap
<1 ‐ 128>
action {permit|deny|set ­ priority
<0 ‐ 7>
}
Configures a filter action for packets that match the VMAP definitions. You
can choose to permit (pass) or deny (drop) packets or set the 802.1p priority
level.
Command mode: Global configuration
access ­ control vmap
<1 ‐ 128>
action redirect {port
<port alias or
number>
|portchannel
<1 ‐ 208>
}
Configures the switch to redirect traffic that matches the VMAP definitions to
a specific port or Link Aggregation Group (LAG).
Command mode : Global configuration
access ­ control vmap
<1 ‐ 128>
egress ­ port
<port alias or number>
Configures the VMAP to function on egress packets.
Command mode: Global configuration
no access ­ control vmap
<1 ‐ 128>
egress ­ port
Disables the VMAP to function on egress packets.
Command mode: Global configuration
access ­ control vmap
<1 ‐ 128>
ethernet
destination ­ mac ­ address
<MAC address>
[
<MAC mask>
]
Defines the destination MAC address for the VMAP.
Command mode: Global configuration
no access ­ control vmap
<1 ‐ 128>
ethernet
destination ­ mac ­ address
Removes the destination MAC address for the specified VMAP.
Command mode: Global configuration