Lenovo RackSwitch G8332, Справочник по командам

Страница: 26 / 776

26
G8332 Command Reference for ENOS 8.4
Global Commands
Some basic commands are recognized throughout the ISCLI command modes.
These commands are useful for obtaining online help, navigating through the
interface, and for saving configuration changes.
For help on a specific command, type the command, followed by
help
.
Table 3.
Description of Global Commands
Command Action
?
Provides more information about a specific
command or lists commands available at the current
level.
list
Lists the commands available at the current level.
exit
Go up one level in the command mode structure. If
already at the top level, exit from the command line
interface and log out.
copy running ­ config
startup ­ config
Write configuration changes to non ‐ volatile flash
memory.
logout
Exit from the command line interface and log out.
traceroute
Use this command to identify the route used for
station ‐ to ‐ station connectivity across the network.
The format is as follows:
traceroute [{
<hostname>
|
<IP address>
}
[
<max ‐ hops (1 ‐ 32)>
[
<msec ‐ delay (1 ‐ 4294967295)>
]]
[data ­ port|mgt ­ port]]
Where:

hostname/IP address
: Sets the hostname or
IP address of the target station.

max ­ hops
: Sets the maximum distance to trace.

msec ­ delay
: Sets the number of milliseconds
to wait for the response.
By default, the management port is used. To use a
specific port, use the following options:

data port:
data ­ port

management port:
mgt ­ port
Note: The DNS parameters must be configured if
specifying hostnames.