Lenovo RackSwitch G8332, Справочник по командам

Страница: 24 / 776

24
G8332 Command Reference for ENOS 8.4
Router RIP
RS G8332(config ­ router ­ rip)#
Enter RIP Configuration mode, from Global Configuration
mode:
router rip
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
Route Map
RS G8332(config ­ route ­ map)#
Enter Route Map Configuration mode, from Global
Configuration mode:
route ­ map
<1 ‐ 255>
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
Router VRRP
RS G8332(config ­ vrrp)#
Enter VRRP Configuration mode, from Global Configuration
mode:
router vrrp
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
PIM Component
RS G8332(config ­ ip ­ pim ­ comp)#
Enter Protocol Independent Multicast (PIM) Component
Configuration mode, from Global Configuration mode:
ip pim component
<1 ‐ 2>
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
IKEv2 Proposal
RS G8332(config ­ ikev2 ­ prop)#
Enter IKEv2 Proposal Configuration mode, from Global
Configuration mode:
ikev2 proposal
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
MLD Configuration
RS G8332(config ­ router ­ mld)#
Enter Multicast Listener Discovery Protocol Configuration
mode, from Global Configuration mode:
ipv6 mld
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
MST Configuration
RS G8332(config ­ mst)#
Enter Multiple Spanning Tree Protocol Configuration mode,
from Global Configuration mode:
spanning ­ tree mst configuration
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
Table 2. ISCLI Command Modes (continued)
Command Mode/Prompt Command used to enter or exit