Lenovo RackSwitch G8332, Справочник по командам

Страница: 565 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
565
neighbor group
<1 ‐ 8>
redistribute
Configures BGP neighbor group redistribution. To view command options,
see page 568 .
Command mode: Router BGP
neighbor group
<1 ‐ 8>
remote ­ as
<AS number (1 ‐ 65535)>
[alternate ­ as
<AS number (1 ‐ 65535)>
]
Adds a remote access server (RAS) into the RAS list. Using the
alternate ­ as
option you can add up to 5 alternate access servers.
Command mode: Router BGP
neighbor group
<1 ‐ 8>
route ­ map {in|out}
<route map ID (1 ‐ 255)>
Adds route map into in ‐ route or out ‐ route map list.
Command mode: Router BGP
no neighbor group
<1 ‐ 8>
route ­ map {in|out}
{
<route map ID (1 ‐ 255)>
|all}
Removes route map from in ‐ route map list.
Command mode: Router BGP
neighbor group
<1 ‐ 8>
route ­ origination ­ interval
<min orig time (1 ‐ 65535)>
Sets the minimum time between route originations, in seconds.
The default value is
15
seconds.
Command mode: Router BGP
[no] neighbor group
<1 ‐ 8>
route ­ reflector ­ client
Enables or disables the group as a route reflector client. Configuring route
reflector clients, implicitly sets up the local router as a route reflector.
Command mode: Router BGP
[no] neighbor group
<1 ‐ 8>
send ­ community
Enables or disables sending a community attribute to a BGP neighbor group.
Command mode: Router BGP
no neighbor group
<1 ‐ 8>
shutdown
Enables this peering group configuration.
Command mode: Router BGP
neighbor group
<1 ‐ 8>
shutdown
Disables this peering group configuration.
Command mode: Router BGP
Table 300.
BGP Peering Group Configuration Options (continued)
Command Syntax and Usage