Lenovo RackSwitch G8332, Справочник по командам

Страница: 17 / 776

© Copyright Lenovo 2016 Preface
17
How This Book Is Organized
Chapter 1, “ISCLI Basics“ , describes how to connect to the switch and access the
information and configuration commands. This chapter provides an overview of
the command syntax, including command modes, global commands and
shortcuts.
Chapter 2, “Information Commands“
, shows how to view switch configuration
parameters.
Chapter 3, “Statistics Commands“
, shows how to view switch performance statistics.
Chapter 4, “Configuration Commands“ , shows how to configure switch system
parameters, ports, VLANs, Spanning Tree Protocol, SNMP, Port Mirroring, IP
Routing, Link Aggregation and more.
Chapter 5, “Operations Commands“ , shows how to use commands which affect
switch performance immediately, but do not alter permanent switch
configurations (such as temporarily disabling ports). The commands describe how
to activate or deactivate optional software features.
Chapter 6, “Boot Options“ , describes the use of the primary and alternate switch
images, how to load a new software image and how to reset the software to factory
defaults.
Chapter 7, “Maintenance Commands“ , shows how to generate and access a dump of
critical switch state information, how to clear it and how to clear part or all of the
forwarding database.
Appendix A, “Enterprise NOS System Log Messages“
, shows a listing of syslog
messages.
Appendix B, “Getting help and technical assistance“
, lists the resources available
from Lenovo to assist you.
Appendix C, “Notices“ , displays Lenovo legal information.
“
Index
”
includes pointers to the description of the key words used throughout the
book.