Lenovo RackSwitch G8332, Справочник по командам

Страница: 541 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
541
neighbor
<1 ‐ 256>
{address
<IPv6 address>
|interface
<1 ‐ 126>
|
|priority
<0 ‐ 255>
}
Configures directly reachable routers over non ‐ broadcast networks.This is
required for non ‐ broadcast multiple access (NBMA) networks and optional for
Point ‐ to ‐ Multipoint networks.

address
configures the neighbor’s IPv6 address.

interface
configures the OSPFv3 interface used for the neighbor entry.

priority
configures the priority value used for the neighbor entry. A
priority value of 255 is the highest and 1 is the lowest. A priority value of 0
specifies that the neighbor cannot be used as Designated Router or Backup
Designated Router.
The default value is
1
.
Command mode : Router OSPF3
[no] neighbor
<1 ‐ 256>
enable
Enables or disables the specified neighbor.
Command mode: Router OSPF3
no neighbor
<1 ‐ 256>
Deletes the neighbor entry.
Command mode : Router OSPF3
[no] nssaAsbrDfRtTrans
Enables or disables setting of the P ‐ bit in the default Type 7 LSA generated by
an NSSA internal ASBR.
The default setting is
disabled
.
Command mode : Router OSPF3
reference ­ bandwidth
<0 ‐ 4294967295>
Configures the reference bandwidth, in kilobits per second, used to calculate
the default interface metric.
The default value is
100,000
.
Command mode : Router OSPF3
router ­ id
<IPv4 address>
Defines the router ID.
Command mode : Router OSPF3
Table 285.
OSPFv3 Configuration Options (continued)
Command Syntax and Usage