Lenovo 7D7Q, Руководство по обслуживанию

Страница: 143 / 184

Figure 121. Top cover installation
After you finish
Complete the parts replacement. See “Complete the parts replacement” on page 140 .
VGA cable replacement
Use the following information to remove and install the VGA cable.
Remove the VGA cable (2.5-inch drive model)
Use this information to remove the VGA cable for the 2.5-inch drive model.
About this task
Attention:
• Read the following section(s) to ensure that you work safely.
– “Safety” on page iii
– “Installation Guidelines” on page 51
• Turn off the server. Disconnect the power cords and all external cables. See “Power off the server” on
page 11 .
• If the server is installed in a rack, remove the server from the rack.
Watch the procedure
A video of this procedure is available at YouTube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-
BPZOAqQMD37KjuxaVHVBkH .
Step 1. Make preparations for this task.
a. Remove the top cover. See “Remove the top cover” on page 132 .
b. Remove the front operator panel (2.5-inch drive model). See “Remove the front operator panel
(2.5-inch drive model)” on page 81 .
Step 2. Remove the VGA cable.
Chapter 4
.
Hardware replacement procedures
135