Lenovo 7D7Q, Руководство по обслуживанию

Страница: 103 / 184

Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
BPZOAqQMD37KjuxaVHVBkH
.
Procedure
Step 1. Make preparations for this task.
a. Remove the top cover. See “Remove the top cover” on page 132 .
b. Remove the PCIe riser assembly. See “Remove the PCIe riser assembly” on page 99 .
Step 2. Remove the PCIe adapter.
a. Disengage the adapter by pulling it straight out of the riser cage.
b. If necessary, install the fillers.
Figure 83. PCIe adapter removal
Note:
Remove one adapter at a time, do not pull out two adapters at the same time.
Step 3. Record the cable connections on the adapter; then, disconnect all cables from the adapter.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install a PCIe adapter (Riser)
Use this information to install a PCIe adapter to the riser.
About this task
Attention:
• Read the following section(s) to ensure that you work safely.
– “Safety” on page iii
– “Installation Guidelines” on page 51
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Chapter 4
.
Hardware replacement procedures
95