Leibinger JET3, Руководство пользователя

Страница: 17 / 233

Group 2 Safety instructions Page 17
Release R1.03e LEIBINGER JET3
2.5 Operating staff
Only trained personnel must operate the device. The personnel must have appropriate
training to enable them to be able to operate the JET3 high performance printer
professionally.
Within the working area of the LEIBINGER JET3 device the operator is responsible with
regard to third parties.
The operator must
„
put this operating manual at the operating staff’s disposal and
„
make sure that they have read and understood them.
2.6 Dangers due to electric energy
The electrical and electronic components of the high performance
printer are under voltage. The device must only be opened by trained
personnel or by Leibinger service technicians.
Prior to the opening of the device the device must be switched off
and the mains plug removed.
2.7 Personal protective equipment
Materials are processed in this device that cause irritations and which are under
pressure. In order to avoid injury and damage the personnel must wear the following
personal protective equipment during certain work procedures:
„
suitable work clothing
„
suitable eye protection
„
suitable hand protection
More detailed information can be found in the corresponding chapters of this manual as
well as possibly in information and data leaflets of consumables.
2.8 Protective devices
In
an emergency the device is placed idle by removal of the mains plug.