LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 94

Страница: 94 / 284

Appendix A: Using the KVM Client

Synchronize Mouse

In the dual mouse mode, the Synchronize Mouse command forces realignment

of the target server's mouse cursor with the User Station's. See

Dual Mouse

Modes

(on page 85).

To synchronize the mouse cursors:

•

Click

> Synchronize Mouse.

•

OR click

Note: This option is available in Automatic and Standard mouse modes only.

However, mouse synchronization may not always be successful with this option.

When this occurs, first check

Mouse Synchronization Tips

(on page 87). If the

mouse synchronization issue still cannot be resolved, enter the Absolute or

single mouse mode. See

Single Mouse Cursor

(on page 84) and

Absolute

Mouse Mode

(on page 85).

Single Mouse Cursor

In single mouse mode, you only use the target server's mouse cursor, and the

User Station's mouse cursor no longer appears on the screen.
On fast LAN connections, you can use single mouse mode, and view only the

target server's pointer.

To enter the single mouse mode:

Click

> Single Mouse Cursor.

Click OK on the confirmation message.

To temporarily exit the single mouse mode and then return to this mode:

Press Ctrl+Alt+M on your keyboard. A message appears, indicating that the

single mouse mode is temporarily suspended.

Now you can use the mouse to control the User Station.

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

LEGRAND Raritan Dominion User Station, Руководство пользователя, Страница: 94 / 284

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы: