LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 238

Страница: 238 / 284

Appendix A: System Settings

228

Setting

Description

Routes

Optional.

Configure the IPv4 routing for this User Station.



Click Add to add one or multiple routing

addresses for the User Station to reach in

the network.



To remove any existing routes, select it and

click Delete.



Ignore automatically obtained routes

Select this checkbox only when you want to

use manually-specified routes.



Use this connection only for resources on its

network

If selected, this connection will be used only

when retrieving resources from the

network. It will never be used as the default

network connection.

Note: You can retrieve current IP addresses from the Connection Information

dialog. See

Network Icon

(on page 241).

Automatic (DHCP) addresses only:

The DHCP server in the network automatically assigns an IPv4 address to

the User Station, but no DNS servers or domain servers are specified.
The following settings are configurable for this method.

Setting

Description

DNS servers

Specify IP addresses of one or multiple DNS

servers.
Use commas to separate multiple servers.

Search domains

Specify IP addresses of one or multiple domains

for resolving host names.
Use commas to separate multiple domains.

DHCP client ID

See the above table for information of these

fields/options.

Require IPv4 addressing

for this connection to

complete
Routes

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

LEGRAND Raritan Dominion User Station, Руководство пользователя, Страница: 238 / 284

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы: