LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 43

Страница: 43 / 284

Appendix A: Managing KVM Switches and Ports

Importing KVM Switches

Bulk Import and Update allows you to add or update multiple KVM switches at

once using a CSV file found in the root folder of a connected USB storage

device.
When you import, Dominion User Station adds devices detected as new by

their IP address/hostname. Dominion User Station uses the credentials given in

the CSV file. If credentials are blank in the file, none are added. When

Dominion User Station detects that a device identified in the CSV file already

exists in the system, the import updates the credentials as given in the CSV.

You can also optionally specify customized Discovery port and HTTPS port for

each device.

CSV file format:

The CSV file contains 5 columns: <ip address or

hostname>,<username>,<password>, <discoveryport>, <HTTPSport>

Note: Username and password are optional. If not imported, user must enter

them later. Discovery port and HTTPS port are optional. If they are not

specified,the default ports 5000 and 443 are used.

See

Bulk Import Examples

(on page 36) for more details and limitations.

To import KVM switches:

Click Import in the User Station Configuration window. See

User Station

Configuration

(on page 27). The Bulk Import/Update KX Devices page

opens.

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

LEGRAND Raritan Dominion User Station, Руководство пользователя, Страница: 43 / 284

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы: