LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 95

Страница: 95 / 284

Appendix A: Using the KVM Client

To return to the single mouse mode, click anywhere on the target server's

image in the KVM Client.

Dual Mouse Modes

In the dual mouse modes, two cursors appear onscreen. They are:

•

The mouse cursor of the User Station.

•

The mouse cursor of the target server connected to the KVM port you are

accessing.

Two mouse cursors align if properly configured.
While in motion, the User Station's mouse pointer slightly leads the target

server's mouse pointer.

Absolute Mouse Mode

In this mode, absolute coordinates are used to keep the User Station's and

target server's cursors in synch, even when the target server's mouse is set to a

different acceleration or speed.
This mode is supported on target servers with USB ports and is the default

mode for virtual media CIMs.
Use of virtual media CIMs on target servers is required for this mouse mode.

See Virtual Media CIMs.
Most modern operating systems on the target servers shall support the

Absolute mouse mode.

Note: Some Linux, UNIX, Solaris or very "unusual" operating systems as well as

some USB profiles may not support the Absolute mouse mode. In this case, use

other mouse modes. For detailed information of each USB profile, see the

section titled "Available USB Profiles" in the KX III KVM switch's user

documentation, which is accessible from the KVM switch application or the

Raritan website's

Support page

(

www.raritan.com/support

To enter the Absolute mouse mode:

•

Click

> Absolute.

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

LEGRAND Raritan Dominion User Station, Руководство пользователя, Страница: 95 / 284

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы: