LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 97

Страница: 97 / 284

Appendix A: Using the KVM Client

Note: Automatic mouse synchronization does not work with UNIX target

servers.

Standard Mouse Mode

Standard mouse mode uses a standard mouse synchronization algorithm. The

algorithm determines relative mouse positions on the User Station and target

server.
In order for the User Station's and target server's mouse cursors to stay in

synch, mouse acceleration must be disabled. Additionally, specific mouse

parameters must be set correctly.

To enter the Standard mouse mode:

•

Click

> Standard.

Mouse Synchronization Tips

If you have an issue with mouse synchronization:
1.

Verify that the selected video resolution and refresh rate are among those

supported by your User Station.

The KVM Client's Connection Properties dialog displays the actual values

the User Station is seeing.

Force a video auto-sense by clicking the KVM Client's Auto-sense Video
button

If that does not improve the mouse synchronization (for Linux, UNIX, and

Solaris target servers):
a.

Open a terminal window.

Enter this command:

xset mouse 1 1

Close the terminal window.

Click the KVM Client's mouse synchronization button

Note: If the mouse synchronization issue still cannot be resolved, enter the

Absolute or single mouse mode. See

Single Mouse Cursor

(on page 84) and

Absolute Mouse Mode

(on page 85).

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

LEGRAND Raritan Dominion User Station, Руководство пользователя, Страница: 97 / 284

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы: