Lean ROBOTIQ AX Series Скачать руководство пользователя страница 16

Страница: 16 / 112

2.2. Intended Use

The Robotiq Palletizing Solution is specifically designed for palletization.

Warning

Only use the application in its original condition without unauthorised modifications.

Warning

Only use the application if it is in perfect technical condition.

Warning

The emergency stop function is intended for use in emergency conditions and not for normal condition stop.

Info

The Solution is intended to be used with a UR10 or UR10e from Universal Robots.

Info

Always comply with local, state, province and/or federal laws, regulation and directives automation safety and general
machine safety.

Caution

The unit should be used exclusively within the range of its technical data. Any other use of the solution is deemed
improper and unintended. Robotiq will not be liable for any damages resulting from any improper or unintended uses.

Содержание ROBOTIQ AX Series

















































































































Результаты поиска

Содержание ROBOTIQ AX Series

Отзывы:

Похожие инструкции для ROBOTIQ AX Series

Бренды по названию

Популярные бренды

Lean ROBOTIQ AX Series, Инструкция по эксплуатации

Результаты поиска

Содержание ROBOTIQ AX Series

Отзывы:

Похожие инструкции для ROBOTIQ AX Series

Бренды по названию

Популярные бренды