8: Device Ports
SecureLinx SLC User Guide
64
To set limits on direct connections:
1. Enter the maximum number (1-10) of simultaneous direct connections for each
device port. The default is 1.
2. Click
Apply
to save the settings.
To configure a specific port:
1. You have two options:
Select the port from the ports list and click the
Configure
button. The Device
Ports – Settings page for the port displays.
Click the port number on the green bar at the top of each page.
2. Continue
with
Device Ports – Settings
on page 64.
Global Commands
The following CLI commands correspond to the web page entries described above.
To configure settings for all or a group of device ports:
set deviceport global <one or more parameters>
Parameters:
maxdirect <1-10>
Sets the maximum number of direct connections for each device port.
sshport <TCP Port>
tcpport <TCP Port>
telnetport <TCP Port>
Port is a port number between 1025 and 65535.
To view global settings for device ports:
show deviceport global
Device Ports – Settings
On the Device Ports - Settings page, configure IP and data (serial) settings for individual
ports, and if the port connects to an external modem, modem settings as well.
To open the Device Ports – Settings page:
You have two options:
In the Device Ports page (described in the previous section), select the port from
the ports list and click the
Configure
button.
Click the desired port number in the green bar (shown below) at the top of any
page:
