10: User Authentication
SecureLinx SLC User Guide
116
KDC IP Address
Enter the IP address of the Key Distribution Center (KDC).
KDC Port
Port on the KDC listening for requests. Enter an integer with a
maximum value of 65535. The default is
88
.
Use LDAP
Indicate whether Kerberos should rely on LDAP to look up
user IDs and Group IDs. This setting is disabled by default.
Note:
Make sure to configure LDAP if you select this option.
Custom Menu
If custom menus have been created (see
Custom User Menus
on
page 125),
you can assign a default custom menu to RADIUS
users.
Data Ports
The ports users are able to monitor and interact with using the
connect direct
command.
Listen Port
The ports users are able to monitor using the
connect listen
command.
Clear Port Buffers
The ports whose port buffer users may clear using the
set
locallog clear
command.
3. In
the
User Rights
section, select the user group to which Kerberos users will
belong.
Group
Select the group to which the Kerberos users will belong:
Default Users:
This group has only the most basic rights
(described above).
Power Users:
This group has the same rights as Default
Users plus
Networking
,
Date/Time
,
Reboot & Shutdown
,
and
Diagnostics & Reports
.
Administrators:
This group has all possible rights.
4. Select or clear the checkboxes for the following rights:
Full Administrative
Right to add, update, and delete all editable fields.
Networking
Right to enter Network settings.
Services
Right to enable and disable system logging, SSH and Telnet
logins, SNMP, and SMTP.
Date/Time
Right to set the date and time.
Local Users
Right to add or delete local users on the system.
Remote
Authentication
Right to assign a remote user to a user group and assign a
set of rights to the user.
SSH Keys
Right to set SSH keys for authenticating users.
User Menus
Right to create a custom user menu for the CLI for Kerberos
users.
