10: User Authentication
SecureLinx SLC User Guide
112
2. Enter the following:
Enable RADIUS
Displays selected if you enabled this method on
the User Authentication page. If you want to set up
this authentication method but not enable it
immediately, clear the checkbox.
Note:
You can enable RADIUS here or on the first
User Authentication page. If you enable RADIUS
here, it automatically displays at the end of the
order of precedence on the User Authentication
page.
RADIUS Server #1
IP address or host name of the primary RADIUS
server.
Server #1 Port
Number of the TCP port on the RADIUS server
used for the RADIUS service. If you do not specify
an optional port, the SLC uses the default RADIUS
port (
1812
).
Server #1 Secret
Text that serves as a shared secret between a
RADIUS client and the server (SLC). The shared
secret is used to encrypt a password sent between
the client and the server. May have up to 128
characters.
RADIUS Server #2
IP address or host name of the secondary
RADIUS server.
Server #2 Port
Number of the TCP port on the RADIUS server
used for the RADIUS service. If you do not specify
an optional port, the SLC uses the default RADIUS
port (
1812
).
Server #2 Secret
Text that serves as a shared secret between a
RADIUS client and the server (SLC). The shared
secret is used to encrypt a password sent between
the client and the server. May have up to 128
characters.
Timeout
The number of seconds (1-30) after which the
connection attempt times out. The default is
30
seconds.
Custom Menu
If custom menus have been created (see
Custom
User Menus
on page 125),
you can assign a
default custom menu to RADIUS users.
Data Ports
The ports users are able to monitor and interact
with using the
connect direct
command.
Listen Port
The ports users are able to monitor using the
connect listen
command.
Clear Port Buffers
The ports whose port buffer users may clear using
the
set locallog clear
command.
Note:
Older RADIUS servers may use 1645 as the default port. Check your
RADIUS server configuration.
