6: Basic Parameters
SecureLinx SLC User Guide
48
2. Enter the following:
Dynamic Routing
Enable RIP
Select to enable Dynamic Routing Information Protocol
(RIP) to assign routes automatically. Disabled by default.
RIP Version
Select the RIP version. The default is
2
.
Static Routing
Enable Static
Routing
Select to assign the routes manually. The system
administrator usually provides the routes. Disabled by
default.
To add a static route, enter the
IP Address
,
Subnet
Mask
, and
Gateway
for the route and click the
Add/Edit Route
button. The route displays in the Static
Routes table. You can add up to 64 static routes.
To edit a static route, select the radio button to the right
of the route, change the
IP Address
,
Subnet Mask
,
and
Gateway
fields as desired, and click the
Add/Edit
Route
button.
To delete a static route, select the radio button to the
right of the route and click the
Delete Route
button.
3. Click
Apply
.
Note:
To display the routing table, click the IP Routes Report link. The
Status/Reports page displays. To view the report, select the IP Routes checkbox and
click Generate Report.
