12: Maintenance and Operation
SecureLinx SLC User Guide
160
e) To open an SSH session to a specific device port, click the
Yes
link in the
SSH
Enabled
column.
To configure how SLCs are searched for on the network:
1. On the SLC Network page, click the
Search Options
button. The following web
page displays:
2. Enter the following:
SLC Network
Search
Select the type of search you want to conduct.
Local Subnet
performs a broadcast to detect SLCs on the
local subnet.
Manually Entered IP Address List
provides a list of IP
addresses that may not respond to a broadcast because of
how the network is configured.
The default is
Both
.
IP Address
If you selected
Manually Entered IP Address
List
or
Both
, enter the IP address of the SLC you want to find and
manage.
3. If you entered an IP address, click the
Add IP Address
button. The IP address
displays in the IP Address List.
4. Repeat steps 2 and 3 for each IP address you want to add.
5. To delete an IP address from the IP Address List, select the address and click the
Delete IP Address
button.
6. Click
Apply
. When the “SLC Network configuration is complete” message displays,
click
SLC Network
on the main menu. The SLC Network page displays the SLCs
resulting from the search. You can now manage these SLCs.
Equivalent SLC Network Command
The following command for the command line interface corresponds to the web page
entry described above:
