SecureLinx SLC User Guide
40
6
6
:
:
B
B
a
a
s
s
i
i
c
c
P
P
a
a
r
r
a
a
m
m
e
e
t
t
e
e
r
r
s
s
This chapter explains how to set the following basic configuration settings for the SLC
using the SLC web interface or the CLI:
Network parameters that determine how the SLC interacts with the attached
network
Firewall and routing
Date and time
Note:
If you entered some of these settings using a Quick Setup procedure, you
may update them here.
Requirements
If you assign a different IP address from the current one, it must be within a valid range,
unique to your network, and with the same subnet mask as your workstation.
To configure the unit, you need the following information:
IP address:
________. ________ . ________ .________
Subnet mask:
________ . ________ . ________ .________
IP address (optional):
________ . ________ . ________ .________
Subnet mask (optional):
________ . ________ . ________ .________
Gateway:
________ . ________ . ________ .________
DNS:
________ . ________ . ________ .________
Eth1
Eth2
