4: Quick Setup
SecureLinx SLC User Guide
27
Restoring Factory Defaults
To use the LCD display to restore factory default settings:
1. Press
the
right arrow
button to move to the last option,
Release
.
2. Use
the
down arrow
to move to the
Restore Factory Defaults
option. A prompt
for the 6-digit
Restore Factory Defaults
password displays.
3. Press
Enter
to enter edit mode.
4. Using
the
left
and
right arrows
to move between digits and the
up
and
down
arrows to change digits, enter the password (the default password is 999999).
Note:
The Restore Factory Defaults password is only for the LCD. You can change
it at the command line interface using the
admin keypad password
command.
5. Press
Enter
to exit edit mode. If the password is valid, a
Save Settings? Yes/No
prompt displays.
6. To initiate the process for restoring factory defaults, select
Yes
. When the process
is complete, the SLC reboots.
Method #2 Quick Setup on the Web Page
After the unit has an IP address, you can use the Quick Setup web page to configure the
remaining network settings. This page displays the first time you log into the SLC only.
Otherwise, the SLC Home Page displays. (For information about the web interface, see
Web Interface
on page
33
.
)
To complete the Quick Setup page:
1. Open a web browser (Netscape Navigator 6.x and above or Internet Explorer 5.5.
and above, with JavaScript enabled).
2. In the URL field, type
https://
followed by the IP address of your SLC.
3. Log in using
sysadmin
as the user name and
PASS
as the password. The first
time you log in to the SLC, the Quick Setup page automatically displays.
Otherwise, the Home page displays.
Note:
To open the Quick Setup page at another time, click
Quick Setup
on the main
menu on the left.
