Lantech LGS-2816C-RPS, Руководство пользователя

Страница: 232 / 248

DEFAULT SETTING
See defaults in Syntax section
COMMAND USAGE
Rules within an ACL are checked in the configured order, from top to
bottom. A packet will be accepted as soon as it matches a permit rule,
or dropped as soon as it matches a deny rule. If no rules match, the
frame is accepted.
EXAMPLE
SYNTAX
show
DEFAULT SETTING
None
EXAMPLE
LGS-2816C-RPS(acl)#set 0 12 port 6 any any any 0 0 0
LGS-2816C-RPS(acl)#
show
This command show all access control entry setting on switch.
LGS-2816C-RPS(acl)# show
port policy id action rate limiter port copy counter
---- --------- ------ ------------ --------- ------------
1 1 permit 1 1 0
2 1 permit 1 1 71959
3 1 permit 1 1 0
4 1 permit 1 1 0
5 1 deny 2 2 0
6 1 permit 1 1 0
7 1 permit 1 1 0
8 1 permit 1 1 0
9 1 permit 1 1 0
10 1 permit 1 1 0
11 1 permit Disabled Disabled 0
12 1 permit Disabled Disabled 0
13 1 permit Disabled Disabled 0
14 1 permit Disabled Disabled 0
15 1 permit Disabled Disabled 0
16 1 permit Disabled Disabled 0
17 1 permit Disabled Disabled 0
18 1 permit Disabled Disabled 0
19 1 permit Disabled Disabled 0
20 1 permit Disabled Disabled 0
21 1 permit Disabled Disabled 0