Lantech LGS-2816C-RPS, Руководство пользователя

Страница: 73 / 248

C
ONFIGURING
P
ORT
I
SOLATION
Port Isolation provides for an apparatus and method to isolate ports on
layer 2 switches on the same VLAN to restrict traffic flow. The
apparatus comprises a switch having said plurality of ports, each port
configured as a protected port or a non-protected port. An address
table memory stores an address table having a destination address and
port number pair. A forwarding map generator generates a forwarding
map which is responsive to a destination address of a data packet. The
method for isolating ports on a layer 2 switch comprises configuring
each of the ports on the layer 2 switch as a protected port or a non-
protected port. A destination address on an data packet is matched
with a physical address on said layer 2 switch and a forwarding map is
generated for the data packet based upon the destination address on
the data packet. The data packet is then sent to the plurality of ports
pursuant to the forwarding map generated based upon whether the
ingress port was configured as a protected or non-protected port.
W
EB
I
NTERFACE
To Configure the Port Isolation in the web interface:
1.
Click VLAN, Port Isolation.
2.
Evoke which port want to enable Port Isolation .
3.
Click Save
Figure 4-20 : Port Isolation Configuration
P
ARAMETERS
These parameters are displayed on the Port Isolation page:

Port 1-24 - The index of Port number. To evoke the port which you
want to enable the Port Isolation service.

Save - Press the ― Save ‖ to complete the PVLAN configuration
process.