Lantech LGS-2816C-RPS, Руководство пользователя

Страница: 43 / 248

C
ONFIGURING
L
OOP
D
ETECTION
The loop detection is used to detect the presence of traffic. When switch receives
packet‘s(looping detection frame) MAC address the same as oneself from port,
show Loop detection happens. The port will be locked when it received the
looping detection frames. If you want to resume the locked port, please find out
the looping path and take off the looping path, then select the resume the locked
port and click on ―Resume‖ to turn on the locked ports.
W
EB
I
NTERFACE
To configure Loop detection in the web interface:
1.
Click SYSTEM, Loop Detection.
2.
Evoke which port to enable the Loop detection.
3
.
Click Apply.
4.
When the port occur Loop and it was locked by switch then you
could resume it.
Figure 4-5: Loop Detection Configuration
P
ARAMETERS
These parameters are displayed on the Loop Detection configuration page:

Port No. – Display the port number. The number is 1 – 24.

Detection Port - When Port No is chosen, and enable port' s Loop
detection, the port can detect loop happens. To evoke the port to
enable auto-detect the Loop.

Locked Port – When Port No is chosen, enable port' s Loop
detection, and the port detects loop happen, the port will be
Locked. When choosing Resume, port locked will be opened and
turned into unlocked. To evoke the port to resume it.