Lantech LGS-2816C-RPS, Руководство пользователя

Страница: 115 / 248

W
EB
I
NTERFACE
To configure rate limits which can be applied to a port:
1 .
Click Configuration, ACL, Rate Limiters.
2.
For any of the rate limiters, select the maximum ingress rate that will
be supported on a port once a match has been found in an assigned
ACL.
3.
Click Apply.
Figure 4-49: ACL Rate Limiter Configuration
P
ARAMETERS
These parameters are displayed on the ACL Rate Limiters Setting page:

Rate Limiter ID – Rate limiter identifier. (Range: 1-16)

Rate (pps) - The threshold above which packets are dropped.
(Options: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K,
16K,32K, 64K, 128K, 256K, 512K, 1024K)
N
OTE
:
Due to an ASIC limitation, the enforced rate limits are slightly
less than the listed options. For example: 1 Kpps translates into an
enforced threshold of 1002.1 pps.
ACL R
ATE LIMITERs
C
ONFIGRATION
The ACL Rate Limiter Configuration page is used to define the rate
limits applied to a port (as configured either through the ACL Ports
Configuration menu or the Access Control List Configuration menu.
.