Lantech LGS-2816C-RPS, Руководство пользователя

Страница: 39 / 248

– 57 –
C
HAPTER
4
| Configuring the Switch
Setting Virtual Stack
P
ARAMETERS
These parameters are displayed on the Time configuration page:

Current Time – To display the current time of the system

Manual – To fill the valid figures in the fields of Year,
Month, Day, Hour, Minute and Second respectively. The
parameter Year, Month, Day, Hour, Minute and Second are
>=2000, 1-12, 1-31, 0-23, 0-59 and 0-59 respectively.

NTP – To set the switch synchronizes the time with NTP
server automatically. NTP is Network Time Protocol and is
used to sync the network time based Greenwich Mean
Time (GMT). If use the NTP mode and select a built-in NTP
time server or manually specify an user-defined NTP
server as well as Time Zone.

Daylight Saving – To set the daylight saving parameter
with unit of hours.

Daylight Saving Start – To set when to start performing
the day light saving time.
This is used to set when to start performing the day light saving time.
Mth:
Range is 1 ~ 12.
Default: 1
Day:
Range is 1 ~ 31.
Default: 1
Hour:
Range is 0 ~ 23.
Default: 0

Daylight Saving End – To set when to stop performing
the day light saving time.
This is used to set when to stop performing the daylight saving time.
Mth:
Range is 1 ~ 12.
Default: 1
Day:
Range is 1 ~ 31.