Lantech LGS-2816C-RPS, Руководство пользователя

Страница: 102 / 248

SNMPv3
COMMUNITIES
CONFIGRATION
The function is used to configure SNMPv3 communities. The
Community and UserName is unique. To create a new community
account, please check < Add new community > button, and enter
the account information then check < Save >. Max Group
Number : 4.
W
EB
I
NTERFACE
To configure SNMPv3 Communities setting:
1.
Click SNMP, Communities.
2.
Click Add new community.
3.
Specify the SNMP communities parameters.
4.
Click Save.
5.
If you want to modify or clear the setting then click Reset.
Figure 4-42: Set up SNMP Communities
P
ARAMETERS
These parameters are displayed on the SNMP Communities Setting page:

Delete – If you had create a new SNMP Community entry then you
could click Delete button to delete the entry.

Community
–
Specify the community field. The length of
―Community‖ string is restricted to 1-32.

UserName - Specify the UserName field. The UserName access
string to permit acccess to SNMPv3 agent. The length of ―UserName‖
string is restricted to 1-32.

Source IP – Specify the Source IP field. The Source IP is
SNMP
access Source IP Address.

Source Mask – Specify the Source Mask field. The Source Mask is
SNMP access Source Submask.
.