Lantech LGS-2816C-RPS, Руководство пользователя

Страница: 51 / 248

C
ONFIGURING
P
ORT
C
ONFIGURATION
The Port Configuration page includes configuration options for enabling
auto-negotiation or manually setting the speed and duplex mode,
enabling flow control, setting the maximum frame size, specifying the
response to excessive collisions, or enabling power saving mode. Port
Configuration is applied to change the setting of each port. In this
configuration function, you can set/reset the following functions. Four
functions, including Port Status, Port Configuration, Simple Counter and
Detail Counter are contained in this function folder for port monitor and
management
W
EB
I
NTERFACE
To configure Port Configuration in the web interface:
1.
Click Port, Configuration.
2.
Specify the Port Configuration parameters. Make any required
changes to the connection settings
3
.
Click Apply.
Figure 4-10: Port Configuration
P
ARAMETERS
These parameters are displayed on the Port Configuration page:

Port – It was displayed the port index.

Media – It shows the port media type with UTP or SFP.

Speed - Sets the port speed and duplex mode using auto-negotiation
or manual selection. The following options are supported:
■
Disable - Disables the interface. You can disable an interface due to
abnormal behavior (e.g., excessive collisions), and then re-enable it after
the problem has been resolved. You may also disable an interface for
security reasons.