–
100 –
C
HAPTER
4
| Configuring the Switch
Configure SNMP
Leave All Time -
A time period for announcement that all
registered device is going to be de-registered. If someone still
issues a new join, then a registration will be kept in the switch.
Valid range: 1000-5000 unit time, Default: 1000 unit time.
Default Applicant Mode
- The mode here means the type of
participant. There are two modes, normal participant and non-
participant, provided for the user‘s choice.
Normal:
It is Normal Participant. In this mode, the switch participates normally
in GARP protocol exchanges. The default setting is Normal.
Non-Participant:
It is Non-Participant. In this mode, the switch does not send or reply
any GARP messages. It just listens messages and reacts for the
received GVRP BPDU.
Default Registrar Mode
- The mode here means the type of
Registrar. There are three types of parameters for registrar
administrative control value, normal registrar, fixed registrar and
forbidden registrar, provided for the user‘s choice.
Normal:
It is Normal Registration. The Registrar responds normally to incoming
GARP messages. The default setting is Normal.
Fixed:
It is Registration Fixed. The Registrar ignores all GARP messages, and
all members remain in the registered (IN) state.
Forbidden:
It is Registration Forbidden. The Registrar ignores all GARP messages,
and all members remain in the unregistered (EMPTY) state.
Restricted Mode -
This function is used to restrict dynamic VLAN
be created when this port received GVRP PDU. There are two modes,
disable and enable, provided for the user‘s choice.
Disabled:
In this mode, the switch dynamic VLAN will be created when this port
received GVRP PDU. The default setting is Normal.
Enabled:
In this mode, the switch does not create dynamic VLAN when this port
received GVRP PDU. Except received dynamic VLAN message of the
GVRP PDU is an existed static VLAN in the switch, this port will be
added into the static VLAN members dynamically.
Содержание LGS-2816C-RPS
