Lantech LGS-2816C-RPS, Руководство пользователя

Страница: 81 / 248

C
ONFIGURING
G
VRP
GVRP is an application based on Generic Attribute Registration Protocol (GARP),
mainly used to automatically and dynamically maintain the group membership
information of the VLANs. The GVRP offers the function providing the VLAN
registration service through a GARP application. It makes use of GARP
Information Declaration (GID) to maintain the ports associated with their attribute
database and GARP Information Propagation (GIP) to communicate among
switches and end stations. With GID information and GIP, GVRP state machine
maintain the contents of Dynamic VLAN Registration Entries for each VLAN and
propagate these information to other GVRP-aware devices to setup and update
their knowledge database, the set of VLANs associated with currently active
members, and through which ports these members can be reached.
W
EB
I
NTERFACE
To display the GVRP Configuration in the web interface:
1.
Click GVRP, Config.
2.
Specify the GVRP Configuration Parameters
3.
Click Apply
Figure 4-27 : Configure GVRP parameters
P
ARAMETERS
These parameters are displayed on the GVRP Configuration page:

GVRP State - This function is simply to let you enable or disable
GVRP function. You can pull down the list and click the
< Downward > arrow key to choose ―Enable‖ or ― Disable ‖. Then,
click the < Apply > button, the system will take effect immediately.

Join Time - Used to declare the Join Time in unit of centisecond.
Valid time range: 20 –100 centisecond, Default: 20 centisecond.

Leave Time - Used to declare the Leave Time in unit of
centisecond. Valid time range: 60 –300 centisecond, Default: 60
centisecond.