Lantech LGS-2816C-RPS, Руководство пользователя

Страница: 78 / 248

C
ONFIGURING
S
TATIC
F
ORWARD
Static Forward is a function that allows the user in the static forward table to
access a specified port of the switch. Static Forward table associated with a
specified port of a switch is set up by manually inputting MAC address and its
alias name.
When a MAC address is assigned to a specific port, all of the switch’s traffics
sent to this MAC address will be forwarded to this port.
W
EB
I
NTERFACE
To Configure the MAC Static Forward in the web interface:
1.
Click MAC, Static Forward.
2.
Specify Static Forward parameters includes MAC Address, Port
No.,VID and Alias
3.
Click Apply
Figure 4-24: MAC Static Forward Configuration
P
ARAMETERS
These parameters are displayed on the Static Filter Configuration page:

MAC - It is a six-byte long Ethernet hardware address and usually
expressed by hex and separated by hyphens. For example,
00 – 40 - C7 - D6 – 00 – 02

Port No - Port number of the switch. It is 1 ~24.

VID - VLAN identifier. This will be filled only when tagged VLAN is
applied. Valid range is 1 ~ 4094.

Alias - MAC alias name you assign.