Lantech LGS-2816C-RPS, Руководство пользователя

Страница: 177 / 248

–
350 –
C
HAPTER
8
| Commands of CLI
Alarm Commandsof CLI

General Query IntervaL – Set the switch send general query
period time. (Available : 1~3600 secs).

General Query Response Timeout - Set the switch determine the
client living time. (Available : 1~25 secs).

General Query Max Response Time - Set the max response code
value of the general query packet . (Available : 1~25 secs).

Last Member Query Count - Set the frequency. When Switch
received IGMP leave then switch send specific query frequency.
(Available : 1~16 secs).

Last Member Query Interval - Set the frequency what the Switch
send specific query period time. (Available : 1~25 secs).

Last Member Query Max Response Time - Set the max response
code value in the specific query packet (Available : 1~25 secs).

Router Ports - Set the interface what connect to IGMP Router, and
it is the switch what it send/receive IGMP report/leave port. Router
ports may be only or more than one.
W
EB
I
NTERFACE
To display set the IGMP Snooping Configuration:
1.
Click Snooping.
2.
Specify the Host Time Out field the specific value.
3.
Select Fast Leave member and Router Port member.
4.
Click Apply.
Figure 4-86: Display the IGMP Snooping Configuration
IGMP
SNOOPING
CONFIGURATION
IGMP Snooping enables the switch to issue IGMP host messages on
behalf of hosts that the system discovered through standard IGMP
interfaces. The switch acts with Snooping mode for its hosts. You
enable IGMP Snooping on the switch.