LANDTEC BIOGAS 3000 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 181

LANDTEC BIOGAS 3000 Скачать руководство пользователя страница 35

Operating Manual

35

© Copyright 2016

OMBG3000 – Rev1

enclosure and contents will depend on the options that are fitted, but the
maximum weight is 32kg. It is therefore recommended that the installation be
undertaken by a minimum of two people.

Warning

Although the wall mounting brackets are fitted and
tested at manufacture, during transit it is possible that
they could have worked loose. Prior to installation,
ensure the wall mounting brackets are securely fitted to
the BIOGAS 3000 system.

Four mounting brackets are supplied and fitted to each corner of the BIOGAS
3000. Suitable nut and bolt or rawl bolt arrangements will have to be defined
by the operator for fixing to the wall or framework (it is recommended that
these are stainless steel). The enclosure should be mounted as square and
level as possible.

Dimensions of the enclosure are provided in

Figure 4 - BIOGAS 3000 enclosure

Figure 4 - BIOGAS 3000 enclosure dimensions

«
...
33
34
35
36
37
...
»

Содержание BIOGAS 3000






















































































































































































Отзывы:

Нет отзывов