LANDTEC BIOGAS 3000, Руководство по эксплуатации, Страница: 103 / 181

Operating Manual
General Operating Instructions
103
© Copyright 2016 OMBG3000 – Rev1
5) If ‘Auto Dim’ is enabled, press the middle soft key to edit the auto dim
timeout. Use the keypad to enter a value and store using the

key.
6) Once the settings have been changed, the left soft key becomes available
to ‘Save and Exit’. Once pressed, the user will be returned to the
‘Configure Interface’ menu.
5.7.1.5 Set Time and Date
This option allows the user to set the time and date on the system. The time
and date is recorded alongside the reading taken for each sample point.
1) From the ‘Settings’ menu press key ‘5’ to select the ‘Set Time and Date’
option.
Screen 19 - Set Time and Date
2) Press the right soft key to ‘Exit’ without saving any changes.
3) Press the left soft key to toggle the date format. Available options are
DD/MM/YY, MM/DD/YY, and YY/MM/DD.
4) Press key ‘1’ to edit the date or key ‘2’ to edit the time.
5) Key in a suitable date or time for the system and store using the

key.

Note: Invalid time or date entries will not be accepted.
6) Once the setting has been changed, it is stored immediately.