LANDTEC BIOGAS 3000, Руководство по эксплуатации, Страница: 32 / 181

32 Operating Manual
Installation
OMBG3000 – Iss.01 © Copyright 2016

Note: Inlet pressure to the BIOGAS 3000 system must not exceed 350
mbars (5psi). Where this is exceeded, additional pressure regulation is
required.

Output data cable has been installed (if required) to the BIOGAS 3000
location.

Note: Failure to comply with any of the above may result in additional
time on site and additional costs.
Packaging Contents
4.1.2
Check the product box for the following items:

BIOGAS 3000 system

Key for enclosure locks

Operating manual – found in plastic wallet on the inside of the
enclosure door

Customer wiring diagram – found in plastic wallet on the inside of the
enclosure door

Calibration certificate – found in plastic wallet on the inside of the
enclosure door

Compression fittings – found on the bulkheads on the enclosure base
(see annotations 4, 5, and 7-11 on
Figure 3 - BIOGAS 3000 customer
connections )

Particulate filter for air purge line (LANDTEC part number 2008277/S,
see section
BIOGAS 3000 Consumable Products ).
Storage of the System and Module
4.1.3
The BIOGAS 3000 system and module should not be exposed to extremes of
temperature. It is the user’s responsibility to ensure the system and module
are kept within their ambient operating temperature range.