manualshive.com logo in svg

Lake Shore 372, Руководство пользователя, Страница: 212 / 214

Поделиться
Скачать
Lake Shore 372 Скачать руководство пользователя страница 212

200

 

c

HAPTER

 8: 

Service

Model 372 AC Resistance Bridge and Temperature Controller

8.14  Technical 
Inquiries

Refer to the following sections when contacting Lake Shore for application assistance 
or product service. Questions regarding product applications, price, availability and 
shipments should be directed to sales. Questions regarding instrument calibration or 
repair should be directed to instrument service. Do not return a product to Lake Shore 
without a Return Material Authorization (RMA) number (section 8.14.2).

8.14.1 Contacting 
Lake Shore

The Lake Shore Service Department is staffed Monday through Friday between the 
hours of 8:00 AM and 5:00 PM EST, excluding holidays and company shut down days.

Contact Lake Shore Service through any of the means listed below. However, the most 
direct and efficient means of contacting is to complete the online service request 
form at 

http://www.lakeshore.com/Service/

. Provide a detailed description of the 

problem and the required contact information. You will receive a response within 24 
hours or the next business day in the event of weekends or holidays.

If you wish to contact Service or Sales by mail or telephone, use the following:

8.14.2 Return of 
Equipment

The Model 372 AC resistance bridge and temperature controller is packaged to 
protect it during shipment. 

The user should retain any shipping carton(s) in which equipment is originally received, in 
the event that any equipment needs to be returned.

If the original packaging is not available, a minimum of 76 mm (3 in) of shock 
absorbent packing material should be placed snugly on all sides of the instrument in a 
sturdy corrugated cardboard box. After receiving your Model 372 AC resistance 
bridge and temperature controller, please use reasonable care when removing the 
temperature controller from its protective packaging and inspect it carefully for 
damage. If it shows any sign of damage, please file a claim with the carrier 
immediately. Do not destroy the shipping container; it will be required by the carrier 
as evidence to support claims. Call Lake Shore for return and repair instructions.

All equipment returns must be approved by a member of the Lake Shore Service 
Department. The service engineer will use the information provided in the service 
request form and will issue an RMA. This number is necessary for all returned 
equipment. It must be clearly indicated on both the shipping carton(s) and any 
correspondence relating to the shipment. Once the RMA has been approved, you will 
receive appropriate documents and instructions for shipping the equipment to 
Lake Shore.

8.14.3 RMA Valid Period

RMAs are valid for 60 days from issuance; however, we suggest that equipment 
needing repair be shipped to Lake Shore within 30 days after the RMA has been 
issued. You will be contacted if we do not receive the equipment within 30 days after 
the RMA is issued. The RMA will be canceled if we do not receive the equipment after 
60 days.

Mailing address

Lake Shore Cryotronics
Instrument Service Department
575 McCorkle Blvd.
Westerville, Ohio USA 43082-8888

E-mail address

[email protected]
[email protected]

Sales
Instrument Service

Telephone

614-891-2244
614-891-2243 option 6

Sales
Instrument Service

Fax

614-818-1600
614-818-1609

Sales
Instrument Service

Web service request

http://www.lakeshore.com/Service/

Instrument Service

TABLE 8-14   

Contact information

Содержание 372























































































































































































































Отзывы:

Нет отзывов