manualshive.com logo in svg

Lake Shore 372, Руководство пользователя, Страница: 156 / 214

Поделиться
Скачать
Lake Shore 372 Скачать руководство пользователя страница 156

144

 

c

HAPTER

 6: 

Computer Interface Operation

Model 372 AC Resistance Bridge and Temperature Controller

 

6.5.2 Ethernet 
Firmware Updater

The Ethernet Firmware Updater utility provides a means of updating the firmware 
that controls the Ethernet functionality of the Model 372. It also updates the embed-
ded website and the Java™ utilities found on the Utilities web page. Please visit 
www.lakeshore.com for the latest firmware updates. 

This utility only updates the Ethernet firmware and not the instrument firmware. 
Another utility is provided at the Lake Shore website (www.lakeshore .com) for updating 
the instrument firmware.

To use the Ethernet Firmware Updater utility:

 first ensure that your Java™ Runtime Envi-

ronment is at version 1.6.0 or higher and then use this procedure to download the 
Ethernet firmware Updater utility.

 1. Download the latest Model 372 Ethernet Firmware file from 

www.lakeshore.com. 

 2. Once the firmware files have been downloaded, connect to the embedded web-

site (section 6.4.4), and navigate to the 

Utilities

 page. 

 3. Click  

Launch Ethernet Firmware Updater

. 

 4. Accept any security warning messages that are presented (refer to section 6.5 for 

an explanation of these security warnings). The Ethernet Firmware Updater 
application window should now be open. 

 5. Click 

Upload New Ethernet Firmware

, and a file browser window will open. 

 6. Navigate to the directory where the Model 372 Ethernet firmware is stored. 

Select the file and click 

Open

. 

At this point the application should check to see if the firmware you are attempting to 
update to is newer than what is already installed on the Model 372. If it is, then the 
firmware should immediately begin uploading, and the progress of the firmware 
update operation should be displayed using the two progress bars in the application 
window. 

FIGURE 6-8   

Curve Handler

FIGURE 6-9   

Ethernet 

Firmware Updater

Содержание 372























































































































































































































Отзывы:

Нет отзывов